A process through which a metal is applied with an elongated flap or a ribbon made of metal is known as metal strapping. Metal strapping is very important for the purposes of stabilizing, combining, reinforcing, holding or fastening a metal. Steel is one of the major metal used in metal strapping since it has a high tensile strength and minimal stretch. There are a variety of metal strappings which come in a variety of thicknesses, widths as well as the various grades of a metal. When metal strappings are applied on a metal, they require surface finishing which can be made of either wax, paint, use of zinc or even bluing. Using wax as a surface finish is essential for enhancing transmission of tension around a bundle. Purposes such as bundling items together as well as easier handling and shipping is greatly enhanced by the use of metal strapping. Other purposes of metal strapping include attaching items, reinforcement as well as securing unit loads such as of metal parts.
Metal strapping requires that once the strap has been tensioned, it be sealed to itself. Joints used for sealing are quite a number which enables sealing of metal straps including seal and notch joint, seal less joint, use of a seal and crimp as well as welding to seal them. These seals are in various shapes which depends on where they are to be used. The seals can be used before tensioning of the straps while other have to be put on once the strap has been tensioned. Strapping machines or hand tools are the two major types of hand tools used in metal strapping. In the two types of tools, they must have a dispenser which serves a major role in dispensing the straps being worked on. Strapping machine or hand tools are either operated automatically or they can be operated manually.
Accidents and injuries are common in an environment dealing with metal strappings hence precautionary measures should be put in place to prevent occurrence of such. One should have proper protective gear such as safety glasses and thick gloves which protects a person in case the metal strappings happen to lash out once they are cut. When sealing or cutting metal strappings, it is important also to use the right tools and equipment since they reduces the chances of injuries likely to occur. One should also maintain a safe distance as well as cut the metal strappings in square reducing the sharp pointed edges that are likely to injure and individual. Finally, cleanliness of the working environment should be maintained by ensuring that all scarps present a removed regularly and this prevents the occurrence of injuries.
Finding Parallels Between Straps and Life
Finding Ways To Keep Up With Products